WHAT 3RD PARTY SYSTEMS CAN BE INTEGRATED AND HOW?

Smart-BUS is flexible to integrate to almost any third party Device seamlessly as following but not limited to:

• Televisions, DVD Players, Satellite Boxes (Using IR, BY using RS-232)
• Motorized Projection screen, Projector Lifters, Plasma Lifters (Using relays, Using IR, or by using RS-232-485)
• HVAC (Using IR for Split type, BY using RS-232 for VRV, Using 0-10 for VAV, Using Relays for FCU/AHU and Chilled Water Cooling)
• Fire, and Burglar Alarm systems (Using relays, BY using RS-232, Using 0-5 Volts)
• Fluorescent Dimmable Ballasts (Using 0-10V, Using DMX, Using Dali)
• Pumps, Water Boilers and Heaters (Using Heavy Relays, BY using MOD-BUS and RS-232)
• Long Range RFID and access Control (using RS-232/485)
• Gate and Garage Motors (Using Contact Relays, BY using RS-232)
• Curtain Motors and Shades or Drapes (Using IR, BY using RS-232, Using Relay contacts)
• Electro tined Glass (Using Relays and Dimmers)
• LED Color Changers and color Wheels (Using DMX Drivers, Using Pass through relays)
• Weather Stations (Using RS-232)
• Irrigation Systems (Using relays to control Solenoids, or BY using RS-232)
• Mirror Defogger Sheets (Using relays)
• 3rd Party Lighting Control System (Using RS-232 or KNX/EIB, or Zigbee as to be applicable)
• Media Streaming Boxes like Boxee, Z-Audio, Apple TV ++ (Using UDP IP Protocols, IR)
• Audio Multi-Room like Nuvo, Russound, Channel vision (Using IR, BY using RS-232)
• Presentation and Media Scalers (Using IR, BY using RS-232)
• Jacuzzi, Water valves (Using RS-232, Relays and sensors)
• Electric Generators (Using S-BUS Gensen)
• Central Battery System (BY using RS-232, 0-5V)
• BMS system (Using OPC Server, BY using RS-232)
• CCTV and DVR (Using IR, BY using RS-232)
• Pool Heat Exchange and Filtration system (Using relays, BY using RS-232)

Examples of the 3rd party Branded systems that Smart-BUS has been used to control or communicate with in several Projects:

• Honeywell
• Clipsal
• HAI
• Nuvo
• Opus
• Crestron
• Mitsubishi
• Daiken
• Carrier
• Sony
• Onque
• Yamaha
• Sunseeker
• Somfi
• Silent Gless
• Cissco
• Avaya
• Quantran
• Poloron
• Futronix
• Lite Touch
• Preussen
• Cool Master
• Makita
• Philips Dynalite
• Cytech Comfort
• Microidee
• Optoma
• Bose
• Buttkicker
• RCS
• Humax
• Panasonic
• Bechamp
• Iridium Mobile
• HCLAEGIS
• FDL, HDL, and Strand
• And Several Others

In Short, Smart-BUS is the future platform to unite Home Automation Entertainment and Intelligent Building Technology Today.

3rd Party Integration Procedures

Integration Recommended Procedure when Linking to Third Party Systems to avoid any inconvenience and guarantee best image and professional approach without any droughts.

• Automation Installation System Prerequisites
• 3rd Party Integration Procedures
• Accurate Cable to Use for Smart-BUS

A- Air-Conditioning Integration:

• If system is Normal "FCU or AHU Type" (cooling/Heating/Fan Speed)
  Kindly use Normal HVAC Controller Type (NO/NC) and use wiring method form AHU/FCU control panel of the AC unit as standard 5-8 Wires. All Control Boards to be selected by MEP must be selected in such a way that can accept any standard (unbranded) local market thermostat.
• If System is "VAV" type:
  Kindly make sure that All VAV's selected are 0-10 Volt Type and follow same standard (unbranded VAV Thermostat Wiring Connection Standards).

*HVAC Integration Procedure:

1. MEP Contractor Must Install, Test, Commission his system fully using Temporary standard (unbranded) market Normal Thermostats that work based on (NO/NC) for AHU/FCU / 0-10v for VAV.
2. MEP Must Balance and Calibrate all his Units after Testing for At least 48-72 Hours. Testing must be done as following: All Rooms to be set to 18-19 degrees (If cooling example), all rooms Doors Must be locked after that and no one to be allowed to enter the space for at least 48-72 Hrs.
3. Inspection to be carried by Owner Rep, Consultant, MEP, and Smart Automation rep after the 48-72 Hours is elapsed without any entry to the locked Area./Areas
4. If all inspection Pass without leakage, temperature in accuracy ++ and once owner and consultant are happy with the results (otherwise repeating of same procedure to be carried again till success).
5. If tests succeed and are certified good for integration, then the Temporary thermostats installed shall be replaced by Smart-HVAC controller instead.

B- Motorized Curtains Integration:

• Standard Market RF Curtains Require Power Outlet for their Motors
• Standard Market AC Curtains Require Double Throw Power for Integration
• Sun seeker Curtains and IR/NO/NC Standard Type also require Control Cable to be connected up to Automation Panel.
• *** We recommend One Power Outlet Double Throw, and One Extra Outlet with Data Control cable to be connected to Control DB/or Zone DB.
• *** All Fabrics to be selected must be thin if for roller, and must be Light in weight; otherwise Motors will have problems, low life, and high sound.
• Curtains Supplier Must provide curtains with either of the following integration possibilities:

o RS-232 (with clear protocol Document) fully programmed and addressed
o NO/NC Connection fully tested
o IR Unique Codes Integration enabled
o AC Normal or Double Throw Type Curtain Motors
o ***(All AC Type and Non AC Types Needs to be coordinated with MEP Contractor to provide proper wiring to electrical and control DB)

Motorized Curtains Integration (continued):

• *** All Fabrics to be selected must be thin if for roller, and must be Light in weight; otherwise Motors will have problems, low life, and high sound.
• Curtains Supplier Must provide curtains with either of the following integration possibilities:
  • RS-232 (with clear protocol Document) fully programmed and addressed
  • NO/NC Connection fully tested
  • IR Unique Codes Integration enabled
  • AC Normal or Double Throw Type Curtain Motors
• *** (All AC Type and Non AC Types Needs to be coordinated with MEP Contractor to provide proper wiring to electrical and control DB)

*Motorized Curtains Integration Procedure:

1. Curtain Provider Install Curtain complete with all Fabrics
2. Curtain Provider test and certify workability
3. Curtain Provider Test integration Ports separately in front of SmartHome
4. SmartHome Connect, test and complete integration in front of Curtain supplier.

C. Motorized GATE Integration:

• Gate Supplier Must Prepare His NO/NC to connect to our Volt-Free dry Ports. (We require: Open, Stop, and Close)

*Motorized GATE Integration Procedure:

1. Gate Provider Install Gate complete
2. Gate Provider test and certify workability
3. Gate Provider Test NO/NC integration Ports separately in front of SmartHome
4. SmartHome Connect, test and complete Gate integration in front of Gate supplier.

D. Lighting Control Integration:

• Wiring for smart Integrated Lighting and Dimming the way is totally different than the Normal Light switch wiring.
• All loads must come to Control Room or Zone DB and to be connected as if all manual switches are located inside that electrical DB or zone DB.
• All Digital control panels that will replace the normal light switches shall be looped as daisy chain and back to the Electrical DB or zone DB (Where Data wire will be used here).

*Lighting Integration Procedure:

1. MEP Contractor Must Install, Test, Commission his system fully after installing Light Fixtures, and then by using Temporary standard Market Normal Switches AT DB.
2. MEP Must Switch once by one circuit, and all together to make sure no electrical shorts.
3. MEP Must Leave all lights totally on for 24-48 Hours to make sure that all connections are secure, no overload, and no sparks.
4. Inspection to be carried by Owner Rep, Consultant, MEP, and Smart Automation rep after the 24-48 Hours is elapsed without any Problems.
5. If all inspection pass without Issues, and once owner and consultant are happy with the results (otherwise repeating of same procedure to be carried again until success).
6. If tests succeed and are certified good for integration, then the Temporary Switches installed temporarily above DB by MEP shall be replaced by Smart-Soft Panels instead.

Recommended Installer Tools on Current / Voltage

Recommended Pro Installer's Tools and Accessories:

Smart-HOME recommend the following Minimal List for Any Installer going on field. Tools that must be always ready, and Materials that must be Handy for Successful Installation. (Good Luck)

• Electric Drill with Drill Pits Sets and Spares
• Buzzer Tone and Cable tester
• Volt Meter with Clamp
• Pulling Strings (+ -)
• Electric Test Screw Driver
• Set of Screw Drivers
• Chalk Line
• Soap
• Markers
• Measuring Tape
• Foldable Ladder
• Masking Tape
• Labeling Machine and Cartridges + Extra Battery Pack
• Extension Power Cord
• Hand Gloves, Goggles, Dust Mask
• Cutter Blade (with spares, knifes)
• Hole Saw Cutter 20mm with lock
• Batching Tool
• Crimping Tool
• Air Blower
• Fish Hook, and Springs
• 45 degree Cutter
• Pliers and Pull Nose
• Pipe Cutter and Pipe Benders
• Headband light
• Spirit Level Meter
• Walki-Talki Set with Charger and Extra Batteries
• Soldier and Iron
• Metal Files
• Rubber Hammer
• French Wrench
• Grinder
• Battery Drill with Charger and Extra Battery
• Data Cable stripper

Installer Recommended Accessory Materials

Some of the Materials that are recommended to be always Handy with Installer for successful Installation of Low current systems:

• Cables (RG-6, UTP cat5e, RG-59)
• Electrical and Audio wires
• HDMI Cables, AV Cables and converters
• Power Sockets, Data and Tel Sockets, Blank Plates ++
• Cylindrical Fuses and Fuse Holders
• DIN Rail Bars
• Extra Water Proof Boxes, and Small DB's
• Cable Manager
• Patching Strips and MDF
• Patch Panels
• Plastic Trunking
• GI Trunking 2 inches
• Fishers and Screws and Bolts and Nuts Set
• Set Connectors (RCA, BNC, RJ45, RJ11, Power, Mic, BUS, RF, T connectors, F connectors..etc)
• Couplers 20mm, 25mm, 50mm
• Electric Insulation Tape
• H

Automation Installation System Prerequisites

In order to Install S-BUS the following Prerequisites must be available prior to Commencing with Smart-BUS Final Installation and Commissioning:

1. LC Cabling for control System is done as per Schematics and riser diagram examples and is certified
2. Third party systems Installed, coordinated, tested and commissioned and certified like:
   • Lighting fixtures
   • HVAC
   • Gates and Garages
   • Motorized Curtains..etc.
3. Temporary or Permanent Electricity is Connected to all DB's and Panels
4. Space is allocated for Smart-BUS Systems additions Ready with Permanent Power Outlets and connection p to S-BUS cabinets / DB's
5. Final Paint Coat is not yet applied
6. No Wall Paper is applied Yet
7. All Ceiling Access Panels are ready as Needed Download Shop Drawings

Smart-BUS Training and Certification

Smart-BUS Training

Smart-Group has designed together with SmartHome-University several training programs to make sure that all Dealers/Installers, Distributors and Consultants are always kept updated and appraised on the latest solutions and technology that the Group has to offer in the Automation, Techno-Lifestyle, and Energy Industries.

Most of these trainings are offered free to the active network partners. Periodical trainings take place at different world nodes like: UAE, Egypt, Germany, USA, Denmark, China, India, South Africa, Australia, Thailand and other Main Hubs.

Some of the Courses Offered:

1. Automation Design, System Selection, BOQ making, Estimation, Proposal Making, and Bidding Strategies
2. Schematics, Connection Diagrams, Wiring and Conduiting, Cables, Tools, Materials, Methodology, Procedures, Contractual correspondence and Installation steps
3. Product Business Development Training for BDM's showing applications for different sectors and touring different product brand development ideas
4. Smart-BUS Installation and Basic programming (Level 1)
   • Lighting and Dimming with Simple Scenes
   • Climate and HVAC Control
   • Music / Distributed Audio
   • Simple Security and Occupancy
5. Smart-BUS Installation and Advanced programming (Level 2)
   • Macros, Moods and Buttons
   • Complex Automation Logic Functions
   • Infra-Red / AV Control Integration
   • Touch screens Data Bases
   • Androids, Win CE, Windows 7, IPhone and Other SW
   • Show Control and SMS
   • Lifters Integration S
   • Shades Motors Integration
   • Video Control
6. Smart-BUS Installation and Pro-programming (Level3)
   • 3rd party Integration Coding
   • Long Range RFID Integration
   • Web Hosts
   • VRV Cool Integration
   • Cool Genset Controls
   • Community Servers
7. Smart-BUS Installation and Scripting programming (Level4)
   • Low Level Coding and Scripting
   • Developers Workshop on Protocol and Integration
8. AMC Contracts, Service Level agreements, Troubleshooting, and Procedures for Protective maintenance, Emergency, corrective, and Replacement Maintenance.
9. Specification Writing, Specifying, and Enrolling Methodology.
10. OEM, ODM Policy, Idea making, Brain Storming and Organizing, Getting The Product Out, Branding, Strategic Marketing Tools.